CUMMINS ALLISON JetScan iFX i100 - Setup Main Menu 1 - Denomination Key Usage; DENOM KEY USAGE

JetScan iFX
®
i100 Scanner All Models
60
Setup Main Menu 1 Key
Description
KEY STATUS
(Continued)
CF, ADD or VERIFY may be locked ON or OFF.
To lock a key
ON:
1. On the main screen, turn the
CF
,
ADD
or
VERIFY
key
ON
.
2. Enter
SETUP
. Go to SETUP MAIN MENU 1 and press
SET
beside KEY
STATUS. On KEY AND FUNCTION ENABLE MENU 1, turn the desired
key
OFF
. When the machine returns to operating mode, the function
key is locked
ON
.
To lock a key
OFF:
1. On the main screen, turn the
CF
,
ADD
or
VERIFY
key
OFF
.
2. Enter
SETUP
. Go to SETUP MAIN MENU 1 and press
SET
beside KEY
STATUS. On KEY AND FUNCTION ENABLE MENU 1, turn the desired
key
OFF
. When the machine returns to operating mode, the function
key is locked
OFF
.
3. When configuration is complete, press
EXIT
to return to SETUP MAIN
MENU 1 or press
MORE
to prompt the KEY AND FUNCTION ENABLE
MENU 2 screen shown below.
This menu allows the following functions to be enabled or disabled:
•
CF SN
(counterfeit document sensitivity control).
•
DENSTY
(density sensitivity control).
•
SERNUM
(SERIAL-NUMBER CORRECTION ADJUSTMENT screen).
When these functions are enabled (highlighted), the associated keys
appear on the ADJUSTMENT MENU.
When configuration is complete, press
BACK
to return to
KEY AND FUNCTION ENABLE MENU 1 or
EXIT
to return to SETUP
MAIN MENU 1.
The SERNUM key appears when the serial-
number capture option is active.