CUMMINS ALLISON JetScan iFX i100 - Setup Main Menu 7; CHECK SETUP

JetScan iFX
®
i100 Scanner All Models
80
Setup Main Menu 6 Key
Description
BARCODE SETUP
Press
SET
to prompt the BARCODE SETUP MENU below.
Bar-code configuration options are described below:
•
BARCODE ENABLED:
Select
ON
to enable bar-code reading on
the machine. Select
OFF
to disable the feature.
•
CONFIGURATION:
Select
SYMB
to view advanced bar-code
symbology settings.
•
READ DIRECTION:
This setting establishes ticket orientation to meet
requirements of the optional JetScan iFX Image Management
Software (IMS) or a third-party software provider. Select the left or
right arrow to indicate bar-code reading direction. The right arrow is
selected for most tickets. The left arrow is selected for CA test
tickets.
Press
SAVE
to save the settings and return to SETUP MAIN MENU 6.
Press
EXIT
to exit the screen and return to SETUP MAIN MENU 6 without
saving changes.
The settings on this screen should be configured
by authorized Cummins Allison personnel only.