Four intensities in
blink aim mode
Four intensities in
continuous aim mode
Aiming beam button
15
GenesisPlus Operator Manual
D1151, R
EV C, 10/16
Working Distance Beam
The working distance beam facilitates proper positioning of the handpiece. When the working
distance beam is centered within the aiming beam, the handpiece is at the optimal working dis-
tance of 3.7 cm and at the correct distance to obtain an accurate temperature reading of the tar-
get tissue.
The intensity of the working distance beam can be adjusted from the Information & Adjust-
ment Screen. (refer to the Information & Adjustment Screen subtopic)
To Next Page
Loading...
