32
GenesisPlus Operator Manual
D1151, R
EV C, 10/16
Annual System Maintenance
Preventive maintenance, safety, power and calibration checks should be performed annually by
a Cutera-certified service engineer to ensure proper laser performance.
System Repair
All system repairs should be performed by a Cutera-certified service engineer. For training and
information, contact your local Cutera representative.
Routine User Maintenance
Clean the external surfaces of the system console Weekly, or as needed
Clean the system touchscreen display Weekly, or as needed
Clean the external surfaces of the handpiece Between each patient use
Inspect and clean the handpiece lenses As needed
Inspect and clean the heat exchanger intake Inspect weekly; clean monthly, or as needed
Fill the coolant reservoir On installation or if water evaporates
To Next Page
Loading...
