52
GenesisPlus Operator Manual
D1151, R
EV C, 10/16
WARNING
Never point the handpiece at reflective objects, such as jewelry or
smooth metal surfaces.
WARNING
Never activate the treatment beam while pointing the handpiece
into free space.
WARNING
Do not leave the system in READY mode when not in use. Always
place the system in the STANDBY mode or turn off the system and
remove the key when not performing treatments.
WARNING
Do not leave the system unattended with the key in place.
CAUTION
Prior to each use of the system, inspect all protective eyewear,
cables and the handpiece for any damage, excessive wear or crimp-
ing that could affect system performance or safe operation.
CAUTION
Do not place any unnecessary stress on the umbilical cable (i.e., by
pulling on it, tightly bending it or twisting the handpiece). See Sys-
tem Specifications topic for additional information on minimum
bend radius.
CAUTION
Always verify that the treatment parameters are correct before acti-
vating the system.
CAUTION
The system should always be in the STANDBY mode until the
handpiece is safely positioned at the area to be treated.
CAUTION
Before placing the system in READY mode, confirm that the laser
aperture on the handpiece is safely positioned to prevent unin-
tended treatment exposure.
To Next Page
Loading...
