© 2014 Cygnus Automotive Limited
59
7 The Totals/Conditional Access Systems
This section describes the two systems possible on the MR400. You can
choose the system you want in the Totals System menu (Section 5.8).
7.1 Basic System
The basic system is designed for use either where only one person uses the
meter or where there is no need to log on or off the meter. When using the
basic system:
• Two sets of totals are provided, resettable and permanent banks.
• Log On/Off menu will be absent from the Info Menu.
7.2 Log on with Totals PIN
This system provides you with a simple way to control the use of your MR400
and/or your taxi.
In order to use the meter, you must first “Log On” to it using either the ‘Totals
PIN’ or ‘User Totals PIN’.
These methods are provided to give you the choice of how to manage the use
of your meter/vehicle.
Examples of ways to use the system are:
• Use the built-in Totals PIN yourself to log on and off. If you leave the
meter logged off when not in use, it can prevent the accidental
addition of extra totals. For example, it can prevent your children from
adding extra journeys to your totals.
• If you set the Totals User PIN, you can use a more easily remembered
number to log on and off as above.
• You can set the Totals User PIN to any value you like. This can then
be given to another user of the meter for 1 or 2 shifts and then changed
afterwards.
To Next Page
Loading...
Need help?
General
