5.5.9 MDT Mode
❢ This option may not be present on your version of MR400.
Mobile Data Terminals (MDT) are often installed in taxis. They are used to
receive information about jobs from a fleet control/booking centre. Many
MDT types can interface to the Cygnus MR400 taximeter via the serial
communications link. By means of the comms link the MDT is able to obtain
information from the meter about the fare, extras, etc.
Figure 28: MDT Mode
Please consult the MDT provider to determine the appropriate setting for their
system.
Press and hold
“SELECT” while
changing the MDT
Mode setting.
Press “EXTRAS” to
change the setting
between AB and D
To Next Page
