© 2014 Cygnus Automotive Limited
61
8.2 Totalling the Fare and Extras
❢ There are several options for totalling the fare and extras. These are set
in the Tariff.
As mentioned in Section 2.7, the MR400 can add the fare and extras together
to display a Total Fare.
To add the fare and extras together in “STOPPED” mode, press the “TOTAL”
button.
Figure 50: Totalling the Fare and Extras
The MR400 may do one of the following:
• When you release the “TOTAL” button, the fare and extras remain
added together until the movement of the vehicle causes the fare to be
increased. At this point they automatically separate.
• When you release the “TOTAL” button, the fare and extras remain
added together until the vehicle moves enough to generate 1 road
pulse, or timeout expires (settable in tariff), whichever happens first.
• When you release the “TOTAL” button, the fare and extras separate
immediately. Also, if the vehicle moves while you are holding the
button down, or timeout expires (settable in tariff), the figures separate
automatically.
To Next Page
Loading...
