5.6.5 Software Information Sub-Menu
Figure 34: Software Menu
This sub-menu contains a series of pieces of information that allow your dealer
to identify:
• The Software Version of your MR400. This identifies which features
your MR400 has.
• The Software Date of your MR400. This is the date your meter’s
software was “built”.
• The Load Date of your software. This is the date your MR400 was
programmed with its software.
• The Tariff Programmer used to program your meter’s software.
• The Firmware Version of your MR400. This is another part of the
software that identifies further features of your unit.
• The Tariff Programmer used to program your meter’s tariff.
In the case of a query, you may need to provide this information to your dealer
or Cygnus.
Press “SELECT” to access the items and “EXTRAS” to move between them.
To Next Page
