DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
all – Display all the IGMP snooping group enties.
vlan_name <vlan_name 8> − The name of the VLAN that IGMP
snooping group configuration information will to be displayed on. Up
to 8 characters can be used.
vlanid <vidlist 1-4094> − The ID of the VLAN that IGMP snooping
group configuration information will to be displayed on.
ports<portlist> − A port or a range of ports that
group configuration information will be displayed on.
ipaddress<ipaddr> − Specifies the IGMP Snooping group IP address
to be displayed.
Restrictions None.
Example usage:
To show igmp snooping group:
DGS-1100-24P/ME:admin#show igmp_snooping group all
Command : show igmp_snooping group all
Total Entries: 0
DGS-1100-24P/ME:admin#
show igmp_snooping static_group
Purpose To display the IGMP snooping multicast group static member port on
the Switch.
Syntax
show igmp_snooping static_group [all | [vlan_name
<vlan_name 8> | vlanid <vidlist 1-4094>]<ipaddr>]
Description
The show igmp_snooping static_group
IGMP snooping multicast group static member ports currently
configured on the Switch.
Parameters
all – Display all IGMP Snooping static group configuration.
vlan_name <vlan_name 8> – Specifies the VLAN name of IGMP
Snooping to be displayed.
vlanid <vidlist 1-4094> – Specifies the VLAN ID of IGMP Snooping
to be displayed.
<ipaddr> – Specifies the IGMP Snooping group IP address to be
displayed.
Restrictions None.
Example usage:
To view the IGMP snooping host table on the Switch:
DGS-1100-24P/ME:admin#show igmp_snooping static_group all
Command : show igmp_snooping static_group all
VLAN ID/Name IP Address Static Member Ports
100
To Next Page
Loading...
