D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable SNMP support on the Switch:
DGS-1100-24P/ME:admin#enable snmp
Command : enable snmp
Success.
DGS-1100-24P/ME:admin#
disable snmp
Purpose To disable SNMP support.
Syntax
disable snmp
Description
The disable snmp command enables SNMP support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable SNMP support on the Switch:
DGS-1100-24P/ME:admin#disable snmp
Command : disable snmp
Success.
DGS-1100-24P/ME:admin#
show snmp
Purpose To dispaly SNMP global state.
Syntax
show snmp global state
Description
The show snmp command displays the global state of the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the SNMP global state of the Switch:
DGS-1100-24P/ME:admin#show snmp global state
Command : disable snmp global state
47