D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
DGS-1100-24P/ME:admin#
show mirror
Purpose To show the current port mirroring configuration on the Switch.
Syntax
show mirror
Description
The show mirror
command displays the current port mirroring
configuration on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display mirror configuration:
DGS-1100-24P/ME:admin#show mirror
Command : show mirror
Current Settings
Mirror status : Enabled
Target Port : 4
Mirrored Port
RX : 1-3
TX : 1-3
DGS-1100-24P/ME:admin#
77