D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To enable STP support
DGS-1100-24P/ME:admin#enable stp
Command : enable stp
Success.
DGS-1100-24P/ME:admin#
disable stp
Purpose To enable STP support of the switch.
Syntax
disable stp
Description
The disable stp command enables STP support of the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable STP support
DGS-1100-24P/ME:admin#disable stp
Command : disable stp
Success.
DGS-1100-24P/ME:admin#
show stp
Purpose To display the STP settings of the switch.
Syntax
show stp
Description
The show stp command displays the STP settings of the switch.
Parameters None.
Restrictions None.
133