DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
show voice_vlan ports
Purpose Shows the Voice VLAN ports information.
Syntax
show voice_vlan ports [list <portlist> | all]
Description This command is used to show the Voice VLAN ports information.
Parameters
list <portlist> - A range of port to display.
all - All ports are specified.
Restrictions None.
Example usage:
To show voice vlan device all information:
DGS-1100-24P/ME:admin#show voice_vlan ports list 2-4
Command : show voice_vlan ports list 2-4
Ports Status Mode
------- ------------- ------------
2 Disabled Auto Untagged
3 Disabled Auto Untagged
4 Enabled Auto Untagged
DGS-1100-24P/ME:admin#
158
To Next Page
Loading...
