D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Example usage:
To configure DoS attack prevention on the switch:
DGS-1100-24P/ME:admin#
config dos_prevention dos_type land_attack
state enable
Command : config dos_prevention dos_type land_attack state enable
Success.
DGS-1100-24P/ME:admin#
show dos_prevention
Purpose To show the DoS prevention information on the switch.
Syntax
show dos_prevention {land_attack | blat_attack | tcp_null_scan
| tcp_xmascan | tcp_synfin | tcp_syn_srcport_less_1024 |
ping_death_attack }
Description This command displays the DoS prevention information on the
switch.
Parameters None.
Restrictions None.
Example usage:
To configure DoS attack prevention on the switch:
DGS-1100-24P/ME:admin#show dos_prevention
Command : show dos_prevention
DoS Type State Action
----------------------------------------- -------------- ---------
Land Attack Enabled Drop
Blat Attack Disabled Drop
TCP Null Scan Disabled Drop
TCP Xmascan Disabled Drop
TCP SYNFIN Disabled Drop
TCP SYN SrcPort Less 1024 Disabled Drop
Ping Death Attack Disabled Drop
DGS-1100-24P/ME:admin#
160