D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Success.
DGS-1100-24P/ME:admin#
disable snmp traps
Purpose To disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description
The disable snmp traps command disables SNMP trap support on
the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To prevent SNMP traps from being sent from the Switch:
DGS-1100-24P/ME:admin#disable snmp traps
Command : disable snmp traps
Success.
DGS-1100-24P/ME:admin#
show snmp traps
Purpose To display SNMP trap support status on the Switch.
Syntax
show snmp traps
Description
The show snmp traps command displays the SNMP trap support
status currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the current SNMP trap support:
DGS-1100-24P/ME:admin#show snmp traps
Command : show snmp traps
Trap Global State : Disabled
Link Up Trap : Disabled
Link Down Trap : Disabled
Coldstart Trap : Disabled
Warmstart Trap : Disabled
Authentication Trap : Disabled
42