D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
enable sntp
Purpose To enable SNTP server support.
Syntax
enable sntp
Description
The enable sntp command enables SNTP server support. SNTP
service must be separately configured (see config sntp). Enabling
and configuring SNTP support will override any manually configured
system time settings.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the SNTP function:
DGS-1100-24P/ME:admin#enable sntp
Command : enable sntp
Success.
DGS-1100-24P/ME:admin#
disable sntp
Purpose To disable SNTP server support.
Syntax
disable sntp
Description
The disable sntp command disables SNTP support.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable SNTP support:
DGS-1100-24P/ME:admin#disable sntp
Command : disable sntp
Success.
DGS-1100-24P/ME:admin#
116