D-Link DGS-1100-16/ME

DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Syntax
show traffic_segmentation {ports <portlist>}
Description
The show traffic_segmentation command displays the current
traffic segmentation configuration on the Switch.
Parameters
ports <portlist> – A port or a port channel for which the current traffic
segmentation configuration on the Switch will be displayed.
Restrictions None.
Example usage:
To display the current traffic segmentation configuration on the Switch:
DGS-1100-24P/ME:admin#show traffic_segmentation
Command : show traffic_segmentation
Port Forward Portlist
------- ------------------------
eth1 9
eth2 9
eth3 9
eth4 1-24
eth5 5-8
eth6 1-24
eth7 1-24
eth8 1-24
eth9 1-24
eth10 1-24
eth11 1-24
eth12 1-24
eth13 1-24
eth14 1-24
eth15 1-24
eth16 1-24
eth17 1-24
eth18 1-24
eth19 1-24
eth20 1-24
eth21 1-24
eth22 1-24
eth23 1-24
eth24 1-24
Total Entries: 24
DGS-1100-24P/ME:admin#
127