D-Link DGS-3130 Series - Page 466

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
455
Log Description Severity
Log Message: Spanning Tree MST configuration ID name and revision level change
(name:<name> revision level <revision_level>).
Parameters description:
name : New name.
revision_level: New revision level.
Event description: Spanning Tree MST configuration ID VLAN mapping table deleted.
Log Message: Spanning Tree MST configuration ID VLAN mapping table change
(instance: <InstanceID> delete vlan <startvlanid> [- <endvlanid>]).
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid: VLAN list
Informational
Event description: Spanning Tree MST configuration ID VLAN mapping table added.
Log Message: Spanning Tree MST configuration ID VLAN mapping table change
(instance: <InstanceID> add vlan <startvlanid> [- <endvlanid>]).
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid: VLAN list
Informational
Event description: Spanning Tree port role change to alternate port due to the guard
root.
Log Message: Spanning Tree port role change (Instance : <InstanceID>, <portNum>) to
alternate port due to the guard root.
Parameters description:
InstanceID: Instance ID.
portNum: Port ID
Informational
Event description: Spanning Tree loop guard blocking.
Log Message: Spanning Tree loop guard blocking(Instance : <InstanceID>, <portNum>)
Parameters description:
InstanceID: Instance ID.
portNum: Port ID
Informational
Peripheral
Log Description Severity
Event description: Temperature sensor enters alarm state.
Log Message: Unit <unit-id> <thermal-sensor-descr> detects abnormal temperature
<degree>
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: Description of the sensor.
degree: The current temperature of the sensor.
Warning
Event description: Temperature recovers to normal.
Log Message: Unit <unit-id> <thermal-sensor-descr> temperature back to normal
Parameters description:
unitID: The unit ID.
thermal-sensor-descr: Description of the sensor.
degree: The current temperature of the sensor.
Informational
Event description: Power failed.
Log Message: Unit <unit-id> <power-descr> failed
Parameters description:
Critical