D-Link DGS-3620-52P - Page 143

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
133
port and also the virtual port channel used.
Operational East Port
Display the operational east port value.
Admin RPL Port
Tick the check box and use the drop-down menu to specify the RPL port used.
Options to choose from are West Port, East Port, and None.
Operational RPL Port
Display the operational RPL port value.
Admin RPL Owner
Tick the check box and use the drop-down menu to enable or disable the RPL
owner node.
Operational RPL
Owner
Display the operational RPL owner value.
Protected VLAN(s) Tick the check box, click the Add or Delete radio button, and enter the protected
VLAN group.
Ring MEL (0-7)
Tick the check box and enter the ring MEL of the R-APS function. The default ring
MEL is 1.
Holdoff Time (0-10000)
Tick the check box and enter the hold-off time of the R-APS function. The default
hold-off time is 0 milliseconds.
Guard Time (10-2000)
Tick the check box and enter the guard time of the R-APS function. The default
guard time is 500 milliseconds.
WTR Time (5-12)
Tick the check box and enter the WTR time of the R-APS function.
Revertive
Tick the check box and use the drop-down menu to enable or disable the state of
the R-APS revertive option.
Current Ring State
Display the current Ring state.
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
After clicking the
Sub-Ring Information link, the following window will appear:
The fields that can be configured are described below:
Parameter Description
Sub-Ring R-APS VLAN
(1-4094)
Enter the Sub-Ring R-APS VLAN ID used here.
State
Tick the check box and use the drop-down menu to add or delete the ERPS Sub-
Ring state.
TC Propagation State
Tick the check box and use the drop-down menu to enable or disable the TC
Propagation state.
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.