D-Link DGS-3620-52P - Download Configuration from RCP; Download Configuration from HTTP; Upload Configuration

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
452
Download Configuration from RCP
This window allows the user to download the configuration file from a RCP Server to the Switch and updates the
switch.
Figure 12-11 Download Configuration from RCP window
The fields that can be configured are described below:
Parameter Description
RCP Server IP
Enter the RCP Server IP Address used.
User Name
Enter the appropriate Username used.
Source File
Enter the location and name of the Source File.
Destination File
Enter the location and name of the Destination File.
Click Download to initiate the download.
Download Configuration from HTTP
This window allows the user to download the configuration file from a computer to the Switch and updates the
switch.
Figure 12-12 Download Configuration File from HTTP window
The fields that can be configured are described below:
Parameter Description
Source File Enter the location and name of the Source File, or click the Browse button to navigate to
the configuration file for the download.
Destination File
Enter the location and name of the Destination File.
Increment
Tick the check box to keep the existing configuration before applying to the new
configuration. Deselect the check box to clear the existing configuration before applying to
the new configuration.
Click Download to initiate the download.
Upload Configuration
The following window is used to upload the configuration file from the Switch.