D-Link DGS-3620-52P - Download Firmware from HTTP; Upload Firmware; Upload Firmware to TFTP

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
449
The fields that can be configured are described below:
Parameter Description
RCP Server IP
Enter the RCP server IP address used.
Source File
Enter the location and name of the Source File.
User Name
Enter the remote user name on the RCP server.
Destination File
Enter the location and name of the Destination File.
Boot Up
Tick the check box to set it as a boot up file.
Click Download to initiate the download.
Download Firmware from HTTP
This window allows the user to download firmware from a computer to the Switch and updates the switch.
Figure 12-6 Download Firmware from HTTP window
The fields that can be configured are described below:
Parameter Description
Source File Enter the location and name of the Source File or click the Browse button to navigate
to the firmware file for the download.
Destination File
Enter the location and name of the Destination File.
Boot Up
Tick the check box to set it as a boot up file.
Click Download to initiate the download.
Upload Firmware
The following window is used to upload firmware from the Switch.
Upload Firmware to TFTP
This window allows the user to upload firmware from the Switch to a TFTP Server.