xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
446
External Alarm Settings
The external alarm settings feature allows you to configure an alarm message when the alarm is triggered.
To view this window, click Monitoring > Peripheral > External Alarm Settings as shown below:
Figure 11-30 External Alarm Settings window
Click the Refresh button to refresh the display table so that modifications will appear.
Click the Edit button for Channel 1 or 2 to change the Alarm Message.
Figure 11-31 External Alarm Settings - Edit window
To Next Page
Loading...
