xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
237
Figure 5-11124 BGP Peer Group Settings - View Detail window
Click the <<Back button to return to the previous window.
BGP Neighbor
BGP Neighbor Group Settings
This window is used to configure a Border Gateway Protocol (BGP) neighbor group.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Group Settings, as
shown below:
Figure 5-11225 BGP Neighbor Group Settings window
The fields that can be configured are described below:
Parameter Description
Peer Group Name
Enter the name of the BGP peer group.
IP Address
Enter the IP address of the BGP speaking neighbor.
Remote AS Number
(1-65535)
Click the radio button and enter the number of autonomous systems to which the peer
group belongs to. The range is from 1 to 65535.
Peer Group Name
Click the radio button and use the drop-down menu to select a name of the BGP peer
group.
Click the Add button to add a new entry based on the information entered in each individual section.
BGP Neighbor Description Settings
This window is used to configure BGP neighbor description settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Description Settings,
as shown below:
To Next Page
Loading...
