D-Link DGS-3620-52P - IP Route Filter; IP Prefix List Settings

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
252
Figure 5-1358 BGP Flap Statistics Table
The fields that can be configured are described below:
Parameter Description
Action
Use the drop-down menu to display the IP or Network address.
IP Address
Enter an IPv4 address to clear the dampening information.
Netmask
Enter the netmask to clear the dampening information.
Click the Apply button to accept the changes made for each individual section.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IP Route Filter
IP Prefix List Settings
This window is used to create and configure an IP prefix list.
To view the following window, click L3 Features > IP Route Filter > IP Prefix List Settings, as shown below:
Figure 5-1369 IP Prefix List Settings window
The fields that can be configured are described below:
Parameter Description
Prefix List Name
Enter the name to identify the prefix list.
Click the Find button to locate a specific entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the Clear Counter button to see the clear counter window.
Click the
View Detail
Click the Edit button to re-configure the specific entry.
link to view more information regarding the specific entry.
Click the Clear button to delete the information in the Description.
Click the Delete button to remove the specific entry.