D-Link DGS-3620-52P - Page 263

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
253
Click the Clear Counter button to see the following window.
Figure 5-13750 IP Prefix List Settings - Clear Counter window
The fields that can be configured are described below:
Parameter Description
Prefix List Name
Enter the name of the prefix list that will be cleared.
IP Address
Enter the IP address to be cleared.
Mask Address
Enter the mask address to be cleared.
Click the Clear button to remove the information entered.
Click the <<Back button to return to the previous window.
Click the Clear All button to remove all the entries.
Click the
View Detail link to see the following window.
Figure 5-13851 IP Prefix List Settings - View Detail window
The fields that can be configured are described below:
Parameter Description
Sequence ID (1-
65535)
Enter the sequence number for the rule entry.
Direction
Use the drop-down menu to Permit or Deny the specified network.
Prefix Address
Enter the network address.
Prefix Mask
Enter the mask address of the network address.
GE (1-32)
Enter the minimum prefix length to be matched.
LE (1-32)
Enter the maximum prefix length to be matched.
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to return to the previous window.
Click the Edit button to re-configure the specific entry.
Click the Clear button to delete the information in the Description.