D-Link DGS-3620-52P - BGP Summary Table; BGP Routing Table

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
250
BGP Summary Table
This window displays the BGP summary information.
To view the following window, click L3 Features > BGP > BGP Summary Table, as shown below:
Figure 5-1325 BGP Summary Table window
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
BGP Routing Table
This window displays BGP routing.
To view the following window, click L3 Features > BGP > BGP Routing Table, as shown below:
Figure 5-1336 BGP Routing Table window
The fields that can be configured are described below:
Parameter Description
Type
Use the drop-down menu to select Regexp, Filter List, Route Map, Prefix List, CIDR Only,
Inconsistent AS, Community, Community List, IP Address or Network. The parameters in
the lower section changes based on the selected type.
Regexp
Enter the regular expression that defines the AS path filter.
Filter List Name
Enter the filter list name that was previously created in BGP AS Path Access Settings
window. This is used to display routes conforming to the filter list.
Route Map Name
Enter the filter list name that was previously created by route map. This is used to display
routes matching the route map.