xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
268
NOTE: Ports that are in the Shutdown Forever mode will be seen as Discarding in Spanning Tree
windows and implementations though these ports will still be forwarding BPDUs to the Switch’s
NOTE: Ports that are in Shutdown Forever mode will be seen as link down in all windows and screens
until the user recovers these ports.
NOTE: The minimum granularity of storm control on a GE port is 1pps.
DSCP
DSCP Trust Settings
This window is used to setup DSCP Trust Settings.
To view this window, click QoS > DSCP > DSCP Trust Settings:
Figure 6-7. DSCP Trust Settings window.
The fields that can be configured are described below:
Parameter Description
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to select the state. You may select Enabled or Disabled.
To Next Page
Loading...
