xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
454
Destination File
Enter the location and name of the Destination File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or
STP. Select the appropriate Filter action and enter the service name in the space
provided.
Click Upload to initiate the upload.
Upload Configuration to HTTP
This window allows the user to upload the configuration file from the Switch to a computer.
Figure 12-15 Upload Configuration File to HTTP window
The fields that can be configured are described below:
Parameter Description
Enter the location and name of the Source File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or
STP. Select the appropriate Filter action and enter the service name in the space
Click Upload to initiate the upload.
Upload Log File
The following window is used to upload the log file from the Switch.
Upload Log to TFTP
This window allows the user to upload the log file from the Switch to a TFTP Server.
Figure 12-16 Upload Log – TFTP window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
To Next Page
Loading...
