D-Link DGS-3620-52P - RADIUS Account Client

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
332
AccessAccepts
The number of RADIUS Access-Accept packets (valid or invalid) received from this
server.
AccessRejects
The number of RADIUS Access-Reject packets (valid or invalid) received from this
server.
AccessChallenges
The number of RADIUS Access-Challenge packets (valid or invalid) received from
this server.
AccessResponses
The number of malformed RADIUS Access-Response packets received from this
server. Malformed packets include packets with an invalid length. Bad
authenticators or Signature attributes or known types are not included as malformed
access responses.
BadAuthenticators
The number of RADIUS Access-Response packets containing invalid authenticators
or Signature attributes received from this server.
PendingRequests
The number of RADIUS Access-Request packets destined for this server that have
not yet timed out or received a response. This variable is incremented when an
Access-Request is sent and decremented due to receipt of an Access-Accept,
Access-Reject or Access-Challenge, a timeout or retransmission.
Timeouts
The number of authentication timeouts to this server. After a timeout the client may
retry to the same server, send to a different server, or give up. A retry to the same
server is counted as a retransmit as well as a timeout. A send to a different server is
counted as a Request as well as a timeout.
UnknownTypes
The number of RADIUS packets of unknown type which were received from this
server on the authentication port
PacketsDropped
The number of RADIUS packets of which were received from this server on the
authentication port and dropped for some other reason.
Click the Clear button to clear the current statistics shown.
RADIUS Account Client
Users can display managed objects used for managing RADIUS accounting clients, and the current statistics
associated with them.
To view this window, click Security > RADIUS > RADIUS Account Client as shown below:
Figure 8-17 RADIUS Account Client window
The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s” stands
for seconds. The default value is one second.
The fields that can be configured are described below:
Parameter Description
ServerIndex
The identification number assigned to each RADIUS Accounting server that the client