D-Link DGS-3620-52P - DSCP Map Settings

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
269
DSCP Map Settings
This window is used to set up DSCP Map Settings.
To view this window, click QoS > DSCP > DSCP Map Settings:
Figure 6-8. DSCP Map Settings window
If the DSCP Map type is set to DSCP DSCP, the window changes as shown below:
Figure 6-9. DSCP Map Settings Window
The following parameters may be set:
Parameter Description
From Port / To Port
Use the drop-down menu to select the port range to use for this configuration.
DSCP Map Use the drop-down menu to select the DSCP Map Type. You may select DSCP
Priority or DSCP DSCP.
DSCP List
This field is used to enter a DSCP value in the space provided, which will instruct
the Switch to examine the DiffServ Code part of each packet header and use this as