D-Link DGS-3620-52P - BGP Community List Settings

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
247
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the
View Detail
Click the Delete button to remove the specific entry.
link to view more information regarding the specific entry.
Click the
View Detail link to see the following window.
Figure 5-12740 BGP AS Path Access Settings - View Detail window
The fields that can be configured are described below:
Parameter Description
Mode Use the drop-down menu to Permit or Deny advertisement based on matching
conditions.
Regular Expression
Enter the regular expression that defines the AS path filter.
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
Click the Delete button to remove the specific entry.
BGP Community List Settings
This window is used to configure the matching rules for a BGP community list.
To view the following window, click L3 Features > BGP > BGP Community List Settings, as shown below:
Figure 5-12841 BGP Community List Settings window
The fields that can be configured are described below:
Parameter Description
List Name
Enter an Autonomous System path access list name.
Type Use the drop-down menu to select Standard or Expanded. Standard configures a
standard community list and Expanded configures an expanded community list.
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.