xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
453
Upload Configuration to TFTP
This window allows the user to upload the configuration file from the Switch to a TFTP Server.
Figure 12-13 Upload Configuration File to TFTP window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IPv6 address used.
Click the radio button to enter the domain name.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Click Upload to initiate the upload.
Upload Configuration to RCP
This window allows the user to upload the configuration file from the Switch to a RCP Server.
Figure 12-14 Upload Configuration to RCP window
The fields that can be configured are described below:
Parameter Description
RCP Server IP
Enter the RCP Server IP Address used.
User Name
Enter the appropriate Username used.
Source File
Enter the location and name of the Source File.
To Next Page
Loading...
