D-Link DGS-3620-52P - JWAC User Settings

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
353
JWAC User Settings
This window is used to configure a JWAC user of the switch’s local database.
To view this window, click Security > Japanese Web-based Access Control (JWAC) > JWAC User Settings as
shown below:
Figure 8-36 JWAC User Settings Window
The fields that can be configured are described below:
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
Password
Enter the password the administrator has chosen for the selected user. This field is
case-sensitive and must be a complete alphanumeric string.
Confirm Password
Retype the password entered in the previous field.
VID(1-4094)
Enter a VLAN ID number between 1 and 4094.
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The Username and Password values should be less than 16 characters.