xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
143
Figure 4-113 LLDP-MED Port Settings window
The fields that can be configured are described below:
Parameter Description
Select the port range to use for this configuration.
NTCS
Use the drop-down menu to enable or disable Notification Topology Change
Status.
State
Use the drop-down menu to enable or disable transmit LLDP-MED TLVs, and tick
the check boxes of the TLV types that the LLDP agent should transmit. TLV types
are Capabilities, Network Policy, Power Pse, and Inventory. Tick the All check
box to select all TLV types.
Click the Apply button to accept the changes made.
LLDP-MED Local Port Information
This window displays the per-port information currently available for populating outbound LLDP-MED
advertisements.
To view the following window, click L2 Features > LLDP> LLDP-MED > LLDP-MED Local Port Information, as
show below:
To Next Page
Loading...
