xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
257
Figure 5-1447 Route Map Settings - Set Clause window
The fields that can be configured are described below:
Parameter Description
Action
Use the drop-down menu to Add or Delete a sequence entry.
Next Hop
Click the radio button to set the next hop attribute. Use the drop-down menu to select
between IP Address and Peer Address.
IP Address - IP address to set.
Peer Address - This will take effect for both the ingress and egress directions. For ingress
direction, the next hop will be set to the neighbor peer address. For egress direction, the
next hop associated with the route in the packet will be the local router ID address.
Metric
(0-4294967294)
Click the radio button to enter the metric.
The BGP router will not send metrics associated with a route by default unless the metric
is egress set in the route map.
If the BGP route receives a route with a metric, then this metric will be used in best path
selection. This can be overwritten by the metric that is ingress set for the route. If the
received route has neither metric attribute nor metric ingress metric set, then the default
metric (0) will be associated with the route for the best path selection. If med-missing-as-
worst is enabled for the router, then a value of infinite will be associated with the route.
This will take effect for both ingress and egress directions.
Local Preference
(0-4294967295)
Click the radio button to enter the local preference for the matched route.
By default, the BGP router will send the default local preference with the routes. It can be
overwritten by the local preference set by the route map. For the received route, the local
preference sent with the route will be used in the best path selection. This local preference
will be overwritten if the local preference is ingress set by the route map.
For the local routes, the default local preference will be used for them in the best path
selection.
This will take effect for both ingress and egress directions.
To Next Page
Loading...
