D-Link DGS-3620-52P - Page 420

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
410
Chassis Manage – Transmit sender ID TLV with chassis ID information and manage
address information.
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
NOTE: The MD Name value should not be more than 22 characters.
To add a maintenance association (MA), click the Add MA button.
Click the Add MA button to see the following window
Figure 10-2 CFM MA Settings Window
The fields that can be configured are described below:
Parameter Description
MA
Enter the maintenance association name.
MA Index
Enter the maintenance association index.
VID
VLAN Identifier. Different MA must be associated with different VLANs.
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the MIP Port Table button to view the CFM MIP Table.
Click the Add MEP button to add a Maintenance End Point entry.
After click in the Edit button the following window appears:
Figure 10-3 CFM MA Settings (Edit) Window