D-Link DGS-3620-52P - Page 487

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
477
username: user name.
Event description: Enable Admin failed due to AAA server timeout or
improper configuration.
Log Message: Enable Admin failed through <Console | Telnet | Web
(SSL)|
SSH> from <ipaddr | ipv6address> due to AAA server <ipaddr | ipv6address>
timeout or improper configuration (Username: <username>)
Parameters description:
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Warning
Event description: Enable Admin failed authenticated by AAA local or server.
Log Message: Enable Admin failed through <Console | Telnet | Web(SSL)|
SSH> from <ipaddr | ipv6address> authenticated by AAA < local | server
<ipaddr | ipv6address>> (Username: <username>).
Parameters description:
local: enable admin by AAA local method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Warning
Event description: Successful login authenticated by AAA local or none or
server.
Log Message: Successful login through <Console | Telnet | Web(SSL) |
SSH> from < ipaddr | ipv6address > authenticated by AAA <local | none | server
<ipaddr | ipv6address>> (Username: <username>).
Parameters description:
local: specify AAA local method.
none: specify none method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Informational
Event description: Login failed authenticated by AAA local or server.
Log Message: Login failed through <Console | Telnet | Web(SSL)| SSH>
from <ipaddr | ipv6address> authenticated by AAA <local | server <ipaddr |
ipv6address>> (Username: <username>).
Parameters description:
local: specify AAA local method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username
: user name.
Warning
WAC
Event description: When a client host fails to authenticate.
Log Message: WAC unauthenticated user (User Name: <string>, IP:
<ipaddr | ipv6address>, MAC: <macaddr>, Port: <[unitID:]portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum
: The port number
Warning
Event description: This log will be triggered when the number of
authorized users reaches the maximum user limit on the whole device.
Log
Message:
WAC enters stop learning state.
Warning
Event description: This log will be triggered when the number of
authorized users is below the maximum user limit on whole device in a time
interval (5 min).
Warning