xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
479
Port < [unitID:] portNum> VID <vlanID> LBD recovered. Loop detection
restarted
Parameters Description:
portNum: The port number.
Event Description: The number of VLAN in which loop back occurs hit the
specified number.
Log Message:
Loop VLAN number overflow.
Parameters Description:
Event description: Dynamic IMPB entry conflicts with static ARP.
Log Message: Dynamic IMPB entry conflicts with static ARP(IP: <ipaddr>,
MAC: <macaddr>, Port <[unitID:]portNum>)
Parameters description:
ipaddr: IP address
macaddr: MAC address
unitID: The unit ID
Event description: Dynamic IMPB entry conflicts with static FDB.
Log Message: Dynamic IMPB entry conflicts with static FDB(IP: [<ipaddr>
| <ipv6addr>], MAC: <macaddr>, Port <[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static IMPB.
Log Message:
Dynamic IMPB entry conflicts with static IMPB(IP: [<ipaddr>
| <ipv6addr>], MAC: <macaddr>, Port <[unitID:]portNum>).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
Event description: Creating IMPB entry failed due to no ACL rule being
available.
Log Message: Creating IMPB entry failed due to no ACL rule being
available(IP:[<ipaddr> | <ipv6addr>], MAC: <macaddr>, Port
<[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
Event description: IMPB checks a host illegal.
Log Message: Unauthenticated IP-MAC address and discarded by IMPB
(IP: [< ipaddr > | < ipv6addr >], MAC :< macaddr >, Port
<[unitID:]portNum >).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
To Next Page
Loading...
