D-Link DGS-3620-52P - Page 499

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
489
bgpBackwardTransNotification
The BGP established event is generated
when the BGP FSM
enters the
ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
1.3.6.1.2.1.15.0.2
Stacking
swUnitInsert
Unit Hot Insert notification.
Binding objects
：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
1.3.6.1.4.1.171.12.11.2.2.1.
0.1
swUnitRemove
Unit Hot Remove notification.
Binding objects
：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
1.3.6.1.4.1.171.12.11.2.2.1.
0.2
swUnitFailure
Unit Failure notification.
Binding objects
：
(1) swUnitMgmtId.
1.3.6.1.4.1.171.12.11.2.2.
1.0.3
swUnitTPChange
The stacking topology change notification.
Binding objects
：
(1) swStackTopologyType
(2) swUnitMgmtId
(3) swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.2.
1.0.4
swUnitRoleChange
The stacking unit role change notification.
Binding objects
：
(1) swStackRoleType
(2) swUnitMgmtId
1.3.6.1.4.1.171.12.1
1.2.2.1.0.5
VRRP
vrrpTrapNewMaster
The newMaster trap indicates that the sending
agent has transitioned to 'Master' state.
Binding objects:
(1) vrrpOperMasterIpAddr
1.3.6.1.2.1.68.0.1
vrrpTrapAuthFailure
A vrrpAuthFailure trap signifies that a packet
has been received from a router whose
authentication key or authentication type
conflicts with this router's authentication key or
authe
ntication type. Implementation of this trap
is optional.
Binding objects:
(1) vrrpTrapPacketSrc
(2) vrrpTrapAuthErrorType
1.3.6.1.2.1.68.0.2
Port Security
swL2PortSecurityViolationTrap
When the port security trap is enabled, new
MAC addresses that violate the pre-
defined port
security configuration will trigger trap messages
to be sent out.
Binding objects
：
(1)swPortSecPortIndex
1.3.6.1.4.1.171.11.118.X.2
.100.1.2.0.2,(X:module ID)