D-Link DGS-3620-52P - Page 70

xStack
®
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
60
Figure 3-50 Web Settings window
The fields that can be configured are described below:
Parameter Description
Web Status
Web-based management is Enabled by default. If you choose to disable this by clicking
Disabled, you will lose the ability to configure the system through the web interface as
soon as these settings are applied.
Port (1-65535)
The TCP port number used for web-based management of the Switch. The “well-known”
TCP port for the Web protocol is 80.
Click the Apply button to accept the changes made.