D-Link DIR-895L

22D-Link DIR-895L User Manual
Section 3 - Installation - Router
Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have
this passphrase or key entered to be able to connect to your wireless network.
Click Next to continue.
Note: The DIR-895L's Smart Connect feature presents a single wireless network. When
connecting clients to an extension network, they will be automatically added to the best
band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually congure
2.4 GHz and 5 GHz networks, refer to Wireless on page 70.
In order to secure the router, please enter a new password. You will be prompted for this
password every time you want to use the router’s web conguration utility. Click Next to
continue.
Setup Wizard (continued)
Device Admin Password
Internet
Wi-Fi ClientDIR-895L
By default, your new D-Link device does not have a password congured for administrator
access to the Web-based conguration utility. To secure your new device, please create a
password below.
NextBack
Device Admin Password:
AdM!n_P@ssW0rd!
Wi-Fi Settings
Internet
Wi-Fi ClientDIR-895L
To setup a Wi-Fi network you will need to give your Wi-Fi network a name(SSID) and
password.
The Wi-Fi Network Name is up to 32 characters. You will need to join your Wi-Fi network
using this Network Name (SSID).
The password must contain at least 8 characters. You will need to join your Wi-Fi network
using this password.
NextBack
Wi-Fi Network Name:
Your_Wi-Fi_Network
Wi-Fi Password:
A_Str0nG_P@ssW0rd!%!