98D-Link DVA-5582 User Manual
Section 3 - Conguration
This page allows you to manually congure the router’s DMZ settings. Since some
applications are not compatible with NAT, the device supports the use of a DMZ IP
address for a single host on the LAN. This IP address is not protected by NAT and it
is visible on the Internet with the correct type of software. Note that any client PC in
the DMZ is exposed to various types of security risks. If you use DMZ, take measures
(such as client-based virus protection) to protect the remaining client PCs on your
LAN from possible contamination through DMZ.
DMZ
Click Apply to save your changes, or Close to return to the previous menu without
saving.
To Next Page
Loading...
Need help?
General
