D-Link DVA-5582

53D-Link DVA-5582 User Manual
Section 3 - Conguration
This menu allows you to bind trac from one interface to another, allowing you to
bypass local bridges and NAT in certain circumstances. Mapping can also allow you
to forward only specic protocols to specic targets. These maps can be accessed
from other menus to synergize with other options. Mappings may be modied or
deleted by selecting the appropriate buttons on the right-hand side corresponding
to the target mapping.
Select Add Mapping to add a new port mapping.
Selecting bridges or DHCP servers will take you to their respective conguration
pages.
Public Addresses
Click Apply to save your changes, or Close to return to the previous menu without
saving.