D-Link DVA-5582

29D-Link DVA-5582 User Manual
Section 3 - Conguration
Click Apply to save settings and continue to the Conguration Wizard Summary on page 30.
Click Close to return to the previous page.
Select Yes to enable Wi-Fi Protected Setup (WPS) as a quick-and-easy
way to setup an encrypted wireless network.
Select a WPS conguration method. As of this writing, the rmware
only supports WPS Push Button for security reasons.
WPS Enabled:
Conguration
Methods:
Wireless Access Point (Cont)
Enter the address of your RADIUS authentication server here.
Enter the port number of your RADIUS server here. Default is 1812
Enter your RADIUS secret here.
Enter the address of your backup RADIUS authentication server here.
Enter the port of your backup RADIUS authentication server here.
The default port is 1812.
Enter your secondary RADIUS secret here.
Radius Server
Address:
Radius Server Port:
Radius Secret:
Secondary Radius
Server Address:
Secondary Radius
Server Port:
Secondary Radius
Secret:
WPA2 Enterprise
Your router provides support for WPA2 Enterprise for use in some corporate
environments. WPA2 Enterprise relies on RADIUS (Remote authentication Dial-In User
Service). If your network uses WPA2 Enterprise, you will have the following additional
options. This is provided for reference only and home users should generally choose
Wi-Fi Protected Setup