D-Link M30 - Page 35

31D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
IPv4 - Static IP
Select Static IP if your IP information is provided by your ISP.
Click Save at any time to save the changes you have made on this page.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway address provided by your ISP.
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP.
Advanced Settings...
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP.
MTU: The default Maximum Transmission Unit is 1500 - you may need to
change the MTU for optimal performance with your ISP.
MAC Address
Clone:
The default MAC address is set as the physical interface MAC address
of port 1 on the router. You can use the drop-down menu to replace
the Internet port’s MAC address with the MAC address of a connected
client.