D-Link M30 - Quick VPN Setup and Usage

82D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Quick VPN
In the Features tab on the left side of the page, click Quick VPN. This page will help you congure the Quick VPN feature of
your router. Before proceeding, ensure that your Internet connection is working properly. We recommend conguring Dy-
namic DNS before proceeding with Quick VPN setup. If your router is assigned with an IP address from your ISP using DHCP,
it may frequently change, requiring clients credentials to be set up again. A DDNS address can avoid this hassle.
To congure the User settings and grant users with Virtual Private Network (VPN) permission, go to Management > User.
Refer to User on page 90. Click Save at any time to save the changes you have made on this page.
L2TP over IPSec: Enable or disable the Quick VPN server.
Username: Enter a username between 1 and 20 characters.
Password: Enter a password between 1 and 20 characters.
PSK: Enter a passkey between 6 and 64 characters.
VPN Prole for iOS
Device and MAC OS X:
Click export to save the VPN prole settings le for iOS devices
or Mac OS X.
Advanced Settings...
Authentication
Protocol:
Choose an authentication protocol type: MSCHAPv2, PAP, or
CHAP. MSCHAPv2 is the default.
MPPE: Select encryption cipher strength: None, RC4-40, or RC4-128.
None is the default.