D-Link M30 - Wireless Network Configuration; Wi-Fi Mesh and Smart Connect Setup; Basic Wi-Fi Network Setup

55D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Wireless
Wi-Fi Mesh
Status: Enable Wi-Fi Mesh if you plan to build a mesh network in your
environment. The Mesh network is able to nd the shortest and fastest
path to your gateway/router in a mesh network topology. Hence, it
enhances eciency and reliability.
Smart Connect
Status: Enable or disable the Smart Connect Feature. To disable the Smart
Connect feature, Wi-Fi mesh must rst be disabled. The Smart
Connect feature presents a single wireless network. When connecting
clients to the extended network, the clients will be automatically added
to the best band, either 2.4 GHz or 5 GHz
If Smart Connect Status is Enabled:
Wireless
Wi-Fi Name
(SSID):
Enter a name for your Wi-Fi network. Up to 32 characters are allowed.
Password: Create a password for your Wi-Fi network. Wireless clients will need to
enter this password to successfully connect to the network.
From this page you can congure your Wi-Fi settings. Click Save at any time to save the changes you have made on this page.