D-Link M30 - Firmware Upgrade Procedures

91D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
Upgrade
This page allows you to upgrade the router’s rmware, either automatically or manually. To manually upgrade the rmware, you
must rst download the latest rmware le from http://support.dlink.com.
In the Management tab on the left side of the page, click Upgrade. Click Save at any time to save the changes you have made
on this page.
Master:
Firmware
Version:
Displays the name of the master router.
Displays the current rmware version of the router.
Check for New
Firmware:
Click this button to prompt the router to automatically check for a new
rmware version. If a newer version is found, click Upgrade Firmware
to download and install the new rmware.
Firmware Information
Advanced Settings... Upgrade Manually
Device Name:
Select File:
Select a device in the mesh network for manual update.
Click the Select File button and browse your computer to locate the
rmware le you want to install. With the le selected, click Upload to
begin the upgrade process.
Automatic
Upgrade:
If enabled, the router will automatically upgrade to the newest
rmware. The system will automatically upgrade to the latest rmware
every day at 3:30-4:00 AM.
Choose
Upgrade Time:
Enable this function to set the router's automatic rmware upgrade
at a set time every day.
Upgrade Time: Congurable if Choose Upgrade Time is enabled. Set the hour and
minute to automatically upgrade the router.
Automatic Firmware Update