D-Link M30 - Ipv6 - Auto Detection

41D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Section 3 - Conguration
IPv6 - Auto Detection
Select Auto Detection to automatically detect the IPv6 connection method
used by your ISP. If Auto Detection fails, you can manually select another
IPv6 connection type. Click Save at any time to save the changes you have
made on this page.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or
Use the following DNS address.
Primary DNS Server: If you select Use the following DNS address, enter the
primary DNS server address.
Secondary DNS Server:
If you select Use the following DNS address, enter the
secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable DHCP Prex Delegation.
LAN IPv6 Link-Local
Address:
Displays the router’s LAN link-local address.
If
Enable DHCP-PD is disabled, these additional parameters are available for conguration:
LAN IPv6 Address: Enter a valid LAN IPv6 address.
LAN IPv6 Link-Local
Address:
Displays the router’s LAN link-local address.